VAG COM 16.8.3 vcds 16.8.3 For AUDI VW SEAT SKODA
Software Version:V16.8.3
(Pls leave us a note about the language you need , or we will send you the English one)
Download the self-installing distribution file available below.
Run it and follow the prompts to allow it to install itself.
The installer will prompt you if you wish to see a PDF of installation instructions.
You must install vag on your PC's hard disk!
It may not work properly if you try running it directly from other media.
However, you can use other media such as a CD or USB memory key to move the distribution file from a PC with internet access to another PC that does not have internet access.
Connect an appropriate interface between the computer and the car.
Turn the car's ignition switch ON. No need to start the engine.
Start the vag program:
Click [Options] and select the correct communications port.
Use [Test] to confirm that the program can use the port and find the interface.
Then [Save].
Now Play. Make sure the software can reliably access all the control modules that it should in your car.
Release Notes:
Release 16.8 works with Windows XP, Vista, 7, 8, and 10 (both 32-bit and 64-bit)
Windows 2000 will probably still work, but we no longer consider it supported.
Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.
Windows 95, 98, ME, and NT4 definitely will not work.
Release 15.7 must be used with a HEX-, KEY-, KII-, or Micro-CAN "high-tech" Interface.
It does not work with any third-party interfaces or some of our older "low-tech" interfaces.
If you're a registered user and have an older low-tech interface, you should consider our
If you're not ready for an interface upgrade, you'll have to use Vag-Lite instead.
It is essential NOT to install in the Program Files tree in on systems running Windows Vista or newer.
Firmware Version: 1.96
Support Language: Deutsch/English/France/Hungarian/Russian/Chinese/Chinese Traditional
(Pls leave us a note about the language you need , or we will send you the English one)
Features: VAGCOM 16.8 VCDS 16.8.0 with Original Chip ATMEGA162 + 16V8B + FT232RL
VCDS 16.8.3 Installation Instructions:
Download the self-installing distribution file available below.
Run it and follow the prompts to allow it to install itself.
The installer will prompt you if you wish to see a PDF of installation instructions.
You must install vag on your PC's hard disk!
It may not work properly if you try running it directly from other media.
However, you can use other media such as a CD or USB memory key to move the distribution file from a PC with internet access to another PC that does not have internet access.
Connect an appropriate interface between the computer and the car.
Turn the car's ignition switch ON. No need to start the engine.
Start the vag program:
Click [Options] and select the correct communications port.
Use [Test] to confirm that the program can use the port and find the interface.
Then [Save].
Now Play. Make sure the software can reliably access all the control modules that it should in your car.
Release Notes:
Release 16.8 works with Windows XP, Vista, 7, 8, and 10 (both 32-bit and 64-bit)
Windows 2000 will probably still work, but we no longer consider it supported.
Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.
Release 15.7 must be used with a HEX-, KEY-, KII-, or Micro-CAN "high-tech" Interface.
It does not work with any third-party interfaces or some of our older "low-tech" interfaces.
If you're a registered user and have an older low-tech interface, you should consider our
If you're not ready for an interface upgrade, you'll have to use Vag-Lite instead.
To remove other old versions:
Versions prior to Release 704, simply delete the shortcuts from your Start menu andDesktop and delete the folder(s) where the program was installed..
Versions prior to Release 704, simply delete the shortcuts from your Start menu andDesktop and delete the folder(s) where the program was installed..
Release 704 and newer may be uninstalled using Windows' Add/Remove Programs or by running the uninstall.exe program found in the folder with the version that you wish to remove.
This article is compiled by www OBD2repair com, if you have any advice on it, pls feel free to contact
OBD2repair - China OBD2 repair Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.
ADD:1102A,DongMing Business Bldg, Longhua new district, Shenzhen 518113,China
Whatsapp (+86)13714697738
Email: info@obd2repair.com
Skype: eobdscan1
Website: www.obd2repair.com
没有评论:
发表评论