Solution of FGTech galletto v54 “Can not find driver”

Solution of FGTech galletto v54 “Can not find driver”

Update from the galletto 3,Galletto 4 V54 is obd2repair hot sale Fgetch Galletto master ecu tool.Multi-language Galletto 4 V54 Fgtech master with 2014 V54 unlock software,there is no need to activatd.Many customers have prolmws when they use the BDM Fgtech V54.Obd2repair share you the solution of FGTech galletto v54 “Can not find driver”

Galletto 4 V54 Fgtech master BDM Fgtech V54



Obd2repair solution of FGTech galletto v54 “Can not find driver”


1) Download and install the Virtual Com Port drivers from FTDI website:

Virtual COM Port Drivers
http://www.ftdichip.com/Drivers/VCP.htm

2) Then connect the FGTech to computer via USB port which had no device programmed and 1 blank device when the MProg Utility it shows.

NOTE: If you had backup and reprogram with the ept file. The system will not recognize the FGTECH and will not reprogram the firmware bin file. The Virtual Com Port Drivers would overlay the fgtech ECU programmer. Then you have to again download the related driver in FTDI website.

CMD Uninstaller 1.4
http://www.ftdichip.com/Support/Utilities.htm

3) After install the right drivers, FTReadWrite programmed the backup firmware file, run galletto v54 software by referring to the user manual

This article is compiled by www OBD2repair com, if you have any advice on it, pls feel free to contact OBD2repair - China OBD2 repair Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

ADD:1102A,DongMing Business Bldg, Longhua new district, Shenzhen 518113,China
TEL :+86-755-29438109
Email: info@obd2repair.com
Skype: eobdscan1
Website: www.obd2repair.com