VAS PC VAS 5054A ODIS VW 4.3.3 ODIS Software Download and Install Guide

ODIS VW Software ODIS 4.3.3 is latest version diagnostic software for vas 5054A and vas 6154.ODIS VAG ODIS 4.3.3 support online programming with dealer account. .OBD2repair.com offer you VAS PC VAS 5054A ODIS VW 4.3.3 ODIS Software Download and Install Guide.

ODIS VW 4.3.3 Software Download Link:

Offboard diagnostic information system service ODIS-S 4.3.3 download free:

https://mega.nz/#F!ggIR1bZC!WpTJr-aaT-WGaMjPP4a-3Q

IT´S only Original Setup -> NO Patched Launcher NO Postsetup NO License!!

Full licence and launcher for 4.3.3:

https://mega.nz/#!U74SEZqS!yFrVx7f1E4DSnMqj7OYY7FP5zo5_XDzrtJdthu0bi-c

Odis 4.3.3 Postsetup (lang = PL,EN,DE):

https://mega.nz/#F!4nIFRSBC!eZjTp6iIb5X8LkiFd48z-w

OBD2repair.com notice :

This software download resource is from internet , pls take your own risk. 

For tested and work 100% ODIS VW ODIS Software, pls check

How to Install ODIS VW ODIS 4.3.3?

Remove EDIC 1.20.42 from PC
Then install this older EDIC attached:

https://mega.nz/#!URV1nLwa!mn6xoEUmQeyCwhes1tDB6qvp20trgDUYy6BVNxRnLUk

the installation of this odis is done and after finishing you must install the EDIC_D_PDU_API_1.20.41, so that it recognizes the device? if so, could someone explain how to perform that step of uninstallation and installation, of EDIC DPU ? is there any risk of damaging my clone device? 

If you should check post install (before you plug in your device) in Add/Remove programs you should see Softing D-PDU API V1.20.042 EDIC_D_PDU_API_OE/OS
Remove these from PC and reboot (just in case)
Install the EDIC provided above with version 041
Then plug in your device and test

I myself have not tested the above I’m still using the 4.2.3 in a VM with clone VAS 5054A. This soft needs an generated key depending on the PC.
The 4.3.3 I also installed in a VM, downgraded the EDIC_D_PDU_API_1.20.41 for the clone VAS5054A. I’m preparing for a mechanic friend and will try it out soon at some cars.
If this 4.3.3 runs without key, why the former 4.2.3 was with a hardware key? Or is there any other resctrictions for using?

ODIS v4.2.3 was protected with Enigma software so that it needed activation key to load program (IMMO)
ODIS v4.3.3 was provided by Mr totalfree with no such restrictions
The reason for the restrictions is to stop sellers who come to forums, download and sell dollars sadly they will download this and sell for profit this free material. It is forum life sadly..

I’m from Spain and maybe my translator does not translate very well, but I do not understand why there are 3 license files.
What do I have to choose to install?
Can I have VW, AUDI, Seat .. in the same program?

For now you choose NVASC
N – VW Commercial
V – VW
A – Audi
S – Seat
C – Skoda
E – Bentley, but no PostSetup existing yet.

When Odis 4.3.3 install and run it ok Upadte looking for me. ort pick and then try and get this picture as that data are not current. dal has a solution for this problem ?? 

With DB version 51.0.40 you must use licence NVASC (No Bentley)
With DB version 51.0.20 you can use ANY licence file

DB version 51.0.20 comes direct from ErWin link in post number 1

Focus On OBD Tool Since 2008

More detail about ODIS VW ODIS 4.3.3 Software ,pls connect

Website:www.obd2repair.com

Skype：obd2repair / eobdscan1

We Chat/ Whatsapp (+86)13728823163

Email: info@obd2repair.com

Facebook: www.facebook.com/obd2repaircom/