Volvo Tech Tool vs. Dev2tool vs. Visfeed Which to Choose ?

Volvo Tech Tool, Dev2tool and Visfeed all are software for Volvo/Mack/Renault/UD vocom trucks.
But do you know the difference and which to choose? OBD2repair.com will share you 
difference among volvo diagnostic software Volvo Tech Tool, Dev2tool and Visfeed.
 
Volvo tech tool Volvo PTT : for diagnosis
dev2tool: for programming
Visfeed: for reprogramming
 
For details, here you go.
 
What is Volvo tech tool:
 
OEM Diagnostic Tool. Premium Volvo Tech Tool (Volvo PTT) is a Windows-based diagnostic application specially designed to test, calibrate and program engine parameters.
 
Read / Interpret Fault Data
Extensive Diagnostic Tools
Facilitates Update Process
Clear all diagnostic trouble codes including emissions related ReGen codes.
Volvo Tech Tool software will communicate with trucks below, with the proper interface device like Volvo Vocom 88890300 or Volvo VCADS
 
Volvo Trucks (Older electrical system, Vehicle electronics ’98, VERSION2, VERSION3, VERSION4)
Volvo Trucks (VERSION4 – FH4/FM4);
Volvo Buses (Conventional, Multiplexed, Multiplexed version 2, Multiplexed version 3)
Volvo Construction Equipment
Volvo Penta (VERSION2, VERSION3)
Volvo OEM Component Customer (VERSION2, VERSION3);
Mack Trucks (V-MAC I/II/III ITC, V-MAC IV, V-MAC IV+)
Renault Trucks (VERSION2, VERSION3, VERSION4);
UD Trucks (VERSION2, VERSION3, VERSION4)
 
Note: the latest Volvo Tech Tool: version 2.5.86 




 
What is dev2tool:
 
Special tool to access and program parameters at any level without restriction;
• Used primarily for program: speed limit, change CHASSIS ID, immobilizer neutralization;
• Change minimum / maximum values of parameters, for example: increase speed limit;
 
with dev2tool, you have access to all levels(specially level 2) parameters
Dev2tool will give you access to over 11000 parameters! This is correct!
The only problem is that you truck DOES NOT have 11000 parameters.
I got dev2tool and I’ve tried to disable the egr on a 16L volvo engine (volvo D16D US model).
As I said with dev2tool you will see for example a parameter called “EGR Axis” but the ECU on the truck DOES NOT have that parameter in any programming levels.
Pretty much is not possible to disable unless you will find somebody (tuning company) that can reprogram your whole dataset on the engine ECU.
 
Note: the explanation of the parameters for Volvo trucks
 
That parameter HJM (level 5) it is only into PTT database. The ECU on Volvo trucks (US Model) does NOT have that parameter.
Anyway even if exist is not possible to change it because it is level 5.
You can change the value of that parameter but when you turn on the engine it will get back to it’s original value.
Level 5 is only function test, freeze frame data ….
I’ve tried already some level 5 to reprogram but NOPE … not working.
 
Note: Dev2tool for Tech Tool for parameter programming on new trucks FM4/FH4
 
Some of option
• Chassis ID Change.
• Immobilizer ON/OFF.
• Injector programming.
• Speed Limit programming.
 






 
 
What is Visfeed:
 
Small Database Flash files.
 
It works as a Special tool to encrypt/decrypt/edit intermediate storage files for ADVANCED Volvo Trucks Diag users.
With this tool you have this interesting options:
• AdBlue OFF.
• Convert EUR3 to EUR5.
• EGR OFF.
• NOx Torque Reduction OFF.
 
The Tool is made to make all file rebuilding process as simple and easy as possible. It also allows to view ECU file and other information of part and sub part numbers, parameters, PID, PPID, SID, PSID, FMI. Checksum calculation possible of Intel HEX line and whole CSW file. For portability USB key included





More detail about volvo tech tool ,pls connect




Website:www.obd2repair.com

Skype：obd2repair / eobdscan1

Whatsapp (+86)13728823163

Email: info@obd2repair.com

Facebook: www.facebook.com/obd2repaircom/